AJ's
4x4
 Link Tabs
& Brackets
Flat Bottom Link Tab

These tabs work great with our flat truss systems
and to frames or square tube and flat
crossmembers and skid plates.  There is 2 5/8"
between the mounting surface and the center of
the bolt hole.
Part # LTFLAT                        $4.50 each
Sorry, picture coming soon
3" Axle Mount Link Tab

These are made to fit a 3" axle tube and with a
little grinding they can be made to fit many other
axle tube sizes.  There is 2" between the mounting
surface and the center of the bolt hole.
Part # LTAXLE                        $4.50 each
Chassis Tab

These are serious tabs made to fit leaf springs,
large heims, or uniball style joints.  These are also
a good all purpose tab that can be used for many
other things, IE. single ended ram mounts, t-case
mount, trac bar mount.
Part # LTCHASSIS                  $8.00 each
Frame Mount Link Bracket, 10 degree

This bracket can be mounted quickly to the inside
or outside of a frame, or anything with a flat
surface.  The mouth opening is adjustable so it
works well with larger heims or uniball style joints.  
These are made with a 10 degree mounting angle.
 A grinder can make these fit for other mounting
angle quickly and easily.  And the rear leg gives
this an extremely strong design.  These are built
using 3/8" plate steel.
Part # LBFRAME10                $44.00 pair
3" Axle Mount Link Bracket, 10 degree

This link bracket is built with a 2 5/8" inner width.  
This is the popular measurement for many uniball
and large heim with spacer combo's.  It provides
a larger mounting and welding surface for superior
strength.  These used along with our "lbframe"
brackets or "ltchassis" tabs are great for lower
links.
Part # LBAXLE                       $29.00 pair
Email us with the quantity and part #'s that you are looking for and we'll be sure to
get you a shipping quote.  We accept PAYPAL, Check, Cashiers Check/Money
Order.  Contact us for PAYPAL information.

AJ's 4x4
215 Lake Blvd. PMB 639
Redding, CA 96003
(530) 276-3838
admin@ajs4x4.com


       Link Tabs & Brackets, an extremely
important part of any suspension, yet the
most overlooked.  Our tabs and brackets
do NOT overlook this part of building your
ultimate rig.  They are all cut with 9/16" bolt
holes.  You could easily drill them larger if
needed.
     Our brackets are a three sided, one
piece design.  They are CNC cut out of 1/4"
plate steel.  And then bent using a CNC
press.  Brackets are priced, per pair.
The tabs are a single piece of 3/8" plate    
steel that are CNC cut.  These are very popular and can be quickly modified to fit into
countless situations.  Tabs are priced, each.